Accessories

Harken targets megayachts: new electric systems and a dedicated industrial strategy

· Fonte: Press Mare

Harken is launching new products, and it is also expanding its industrial and commercial operations to strengthen its position in the superyacht market, both sail and power. This is what came out of the press conference Harken held at Metstrade in Amsterdam, where the company presented the results of three years of development work on new families of equipment and onboard systems. The work started from the company’s expertise in winches and sailing hardware and has led to solutions for large motor yachts as well. Harken intends to build a more structured presence in that segment.

The strategy was presented by Emanuele Cecchini, Harken’s Sales Director EMEA and APAC, together with Jochem Urban, head of business development for the megayacht sector, and Stephane Leveel, Business Developer for Harken’s Megayacht division. The presentation focused on three areas: Mooring Solutions, Moving Solutions and Furling Systems. Together they extend the company’s offer to shipyards and to the refit market.

The first area is mooring equipment, where Harken is applying the experience it has gained with captive winches, which store and handle lines on dedicated drums. The company referred to the new SOLAS provisions that came into force in January 2024, which tightened safety criteria for the design and operation of mooring arrangements on ships, with particular attention to reducing risks for crews. On this basis, Harken has developed four captive mooring winch models with capacities from 20 to 50 tonnes. The design uses a patented double-roller system for line handling and a layout that allows maintenance to be carried out from one side of the machine only. This matters for onboard integration, because the technical space available and access to components affect both installation and later servicing.

Another part of the offer is the CLR range of retractable capstans, with models from 250 kg up to 12 tonnes. The aim is to respond to changes in the design of superyacht stern areas, which are increasingly given over to beach clubs, swim platforms and lounge areas. In these layouts, equipment that can be retracted when not in use keeps deck surfaces uninterrupted without compromising the mooring arrangements.

The same approach applies to the new retractable bollards, available in three versions rated at 10, 20 and 30 tonnes, and to the concealed fairleads. Both can be installed flush with the deck and finished to match the deck surface. The fairleads can be operated manually with a dedicated key, or by hydraulic or electric actuators, depending on the project. Harken aims to supply a complete mooring system in which winches, bollards and fairleads are designed to work together.

The move into the motor megayacht market takes shape in the new Moving Solutions family. It has been developed to operate moving structures such as passerelles, side shell doors, fold-down balconies, swim platforms and boarding systems. These applications have traditionally relied on hydraulics, and Harken proposes replacing them with electric actuation wherever technically feasible.

According to the presentation, this transition has several advantages. The first is that it eliminates the risk of hydraulic oil leaking into the sea in the event of a failure, which is especially important in marine areas subject to environmental restrictions. The second concerns shipyards directly: electric actuators reduce the need for dedicated hydraulic circuits, with their pumps, piping, tanks and valves, which simplifies design and installation. In some applications the new solutions also reduce the space taken up by the actuation systems.

The product around which the new line has been built is the 48V Rotary Actuator, an electric rotary actuator shortlisted for the DAME Design Award 2026. It is designed to deliver high torque with slow, controlled movements and draws on mechanical and transmission expertise Harken has built up through winch development. The system combines a permanent-magnet brushless motor with a precision cycloidal gearbox and is suited to operating the hinged structures found on large yachts.

The range will be extended step by step, and the first two rotary actuator models are already ready for the market. They are joined by 48V linear actuators, which build in part on the technical experience gained with captive winches and are intended for passerelles, shell doors and other devices that require straight-line movement. The offer is completed by the 24V E-Locking Pin system, developed to lock moving structures mechanically, in particular hull shell doors, for which classification society rules require appropriate closing and safety devices.

These solutions are already past the development stage. Harken has begun a commercial collaboration with Opacmare, supplying electric systems integrated into the Italian company’s equipment. A passerelle fitted with a Harken actuation system is on display at the Opacmare stand at Metstrade, and further applications are in development, including side shell doors and onboard davits. According to Harken, the feedback from its first industrial partners has mainly concerned the availability of ready-to-integrate components, which reduce the engineering work required of equipment manufacturers.

Alongside the systems for motor yachts, Harken presented the new Superyacht Furling Systems family, extending its furler range to large sailing yachts. Until now the company’s range mainly covered boats up to about 60 feet. Growing demand from the sailing superyacht market led to the development of systems sized for higher structural loads.

The project, developed over the past year, includes under-deck furlers, models installed directly on deck, systems for sails furled on anti-torsion cables and solutions for staysails, together with the accessories needed to complete the installation.

The Under Deck Furlers place the mechanism below the deck surface, leaving the deck clear. The system can incorporate the forestay tensioning cylinder and, depending on the configuration, a cunningham adjustment device. This brings several functions together in a single unit and avoids the need for additional structural attachment points and chainplates. Versions are available for sails set on a luff foil and for sails furled on anti-torsion cables, which are used in more performance-oriented configurations.

For yachts where an under-deck mechanism cannot be installed, Harken offers Above Deck Furlers. They use the same mechanical design but are mounted on deck. This makes them particularly suitable for refits and for multihulls, where the structure or layout can make a recessed furler difficult to install.

The range also includes Textile Furlers, intended mainly for Code Zeros and, in certain configurations, for the staysails of large racing yachts. They use a rotating attachment point and can incorporate a control line for tensioning the sail. The aim is more efficient management of the loads and tensions transmitted to the mast.

The Staysail Furlers are designed for structural staysails. The system combines a rotating attachment point and a tensioning device in a flush-deck configuration, with a cover that protects the recess when the equipment is not in use. The offer is completed by top swivels for luff foil systems, bottom swivels for cunningham adjustment and structural swivels for cable applications.

Harken’s stated goal is to give builders of large sailing yachts a coordinated set of components, from captive winches to furlers and their accessories, so that they do not have to turn to different suppliers to complete the deck hardware.

Answering journalists’ questions during the conference, Cecchini also explained the commercial significance of the expanded offer. Harken already has an established position in large sailing yachts, while motor megayachts are a relatively new area of development, which the company is entering with products of higher unit value than traditional hardware.

He noted that a single megayacht can use as many as eight or ten actuators and motion systems, so the total value of the supply is markedly different from that of individual blocks or deck fittings. This explains the decision to invest in a dedicated line and to build direct relationships with manufacturers of components and systems supplied to shipyards.

The collaboration with Opacmare is the first concrete example of this approach. Developing the rotary actuator allowed Harken to find an industrial customer quickly and start real-world applications, opening the way to further joint projects. Cecchini confirmed that the motor superyacht sector is a strategic priority for the company’s future development.

Emanuele Cecchini

The expanded range also requires changes to the production organisation of Harken Italy, where the new equipment is designed and built. Cecchini explained that processes are being reviewed to integrate the new product families into the existing industrial lines.

Production is currently split between lean lines for standard winches and assembly lines for custom winches and captive systems. The plan is to place the new furlers in the facilities already dedicated to custom equipment, while for the electric actuators, which are geared more towards OEM supply, the company is considering the lean methods already used for series-production winches. The aim is to use existing skills and production capacity and adapt them to product families with different characteristics and target markets.

At the same time, a dedicated sales structure has been set up for the superyacht market. Jochem Urban, who has been with Harken for 23 years and works in the Netherlands at the operation created through the acquisition of OnDeck, takes charge of the sales team for this segment and will coordinate activities in Italy, Germany, the Netherlands and Turkey. These are the four markets identified as the main focus for business development, and he will work on them together with local managers.

Stephane Leveel, Business Developer for Harken’s Megayacht division, will contribute his technical expertise to connect customer requirements with new product development. He will work with Michele Cazzaro, Technical Director of Harken Italy, and with Cecchini as part of a programme aimed at the international growth of the sector.

The Amsterdam conference therefore points to changes affecting Harken’s catalogue, production and sales organisation at the same time. The company intends to use technologies developed for sailing as a basis for entering new fields of application, in particular electric actuation on motor megayachts. The first supplies to Opacmare mark the commercial start of this process, while the extended furler range strengthens the offer for large sailing yachts. The two directions complement each other, and both aim to increase the technological content and value of what Harken supplies to shipyards.

Leggi la versione completa su PressMare →